LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity High
  • Priority Very Low
  • Reported Version All
  • Due in Version Undecided
  • Due Date Undecided
  • Votes 1
  • Private
Attached to Project: LEDE Project
Opened by Garfo Mua - 19.04.2017

FS#717 - WRT3200ACM USB 3.0 Problem

I canĀ“t get my Seagate Expansion Portable 1TB STEA1000400 USB3.0 drive to be be recognized on the USB 3.0 port of the router after a reboot or cold start on WRT3200 but if i remove and hotplug the drive, it is automatically detected and can be mounted.
It happens with images from Openwrt 15.05.1, LEDE 17.01.1 and many snapshots from both projects that i have installed. I have no problem with another usb2.0 drive from Samsung that is installed in another USB2.0 port.

After Cold START or REBOOT

 root@LEDE:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.20 (ag33e33@ubuntu) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3963-7ae58be) ) #0 SMP Wed Apr 12 16:12:18 2017
[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: Linksys WRT3200ACM
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0646900, node_mem_map dfbf9000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] percpu: Embedded 13 pages/cpu @dfbce000 s22732 r8192 d22324 u53248
[    0.000000] pcpu-alloc: s22732 r8192 d22324 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,128K(u_env),256K(s_env),256K@8064K(devinfo),1920K@8320K(sysdiag),80m@10m(kernel),74m@16m(rootfs),80m@90m(alt_kernel),74m@96m(alt_rootfs),160m@10m(ubifs),-@170m(syscfg)
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512848K/524288K available (4545K kernel code, 180K rwdata, 1244K rodata, 280K init, 310K bss, 11440K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
                   lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0xc0008000 - 0xc0478918   (4547 kB)
                     .init : 0xc05d4000 - 0xc061a000   ( 280 kB)
                     .data : 0xc061a000 - 0xc0647200   ( 181 kB)
                      .bss : 0xc0647200 - 0xc0694a00   ( 310 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000000] Selected CPU frequency (16) unsupported
[    0.000000] Switching to timer-based delay loop, resolution 40ns
[    0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[    0.000008] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000114] Calibrating local timer... 933.22MHz.
[    0.060032] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.060037] pid_max: default: 32768 minimum: 301
[    0.060076] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060079] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060274] CPU: Testing write buffer coherency: ok
[    0.060365] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.060376] Setting up static identity map for 0x8280 - 0x82d8
[    0.060434] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[    0.060494] mvebu-pmsu: Initializing Power Management Service Unit
[    0.060904] Booting CPU 1
[    0.061041] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.061070] Brought up 2 CPUs
[    0.061075] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[    0.061078] CPU: All CPU(s) started in SVC mode.
[    0.062739] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.062790] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.062796] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.062831] pinctrl core: initialized pinctrl subsystem
[    0.063142] NET: Registered protocol family 16
[    0.063575] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.090041] cpuidle: using governor ladder
[    0.090171] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.090177] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.120467] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe
[    0.120607] SCSI subsystem initialized
[    0.120687] libata version 3.00 loaded.
[    0.120790] usbcore: registered new interface driver usbfs
[    0.120815] usbcore: registered new interface driver hub
[    0.120835] usbcore: registered new device driver usb
[    0.121329] clocksource: Switched to clocksource armada_370_xp_clocksource
[    0.121647] NET: Registered protocol family 2
[    0.121869] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.121890] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.121920] TCP: Hash tables configured (established 4096 bind 4096)
[    0.121941] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.121952] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.122009] NET: Registered protocol family 1
[    0.122021] PCI: CLS 0 bytes, default 64
[    0.122803] Crashlog allocated RAM at address 0x3f00000
[    0.122877] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.124945] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.124953] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.125699] io scheduler noop registered
[    0.125703] io scheduler deadline registered (default)
[    0.126071] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    0.126671] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[    0.126679] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    0.126683] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[    0.126687] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.126701] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[    0.126784] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[    0.126859] PCI: bus0: Fast back to back transfers disabled
[    0.126864] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.126870] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.126918] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
[    0.126933] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
[    0.126943] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
[    0.127002] pci 0000:01:00.0: supports D1 D2
[    0.127005] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.127068] PCI: bus1: Fast back to back transfers disabled
[    0.127073] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.127132] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
[    0.127151] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
[    0.127162] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
[    0.127244] pci 0000:02:00.0: supports D1 D2
[    0.127246] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.127310] PCI: bus2: Fast back to back transfers disabled
[    0.127315] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    0.127384] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
[    0.127390] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
[    0.127396] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.127405] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[    0.127413] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.127418] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe02fffff]
[    0.127425] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[    0.127434] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
[    0.127443] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.127448] pci 0000:00:02.0:   bridge window [mem 0xe0400000-0xe06fffff]
[    0.127646] mv_xor f1060800.xor: Marvell shared XOR driver
[    0.181754] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.181840] mv_xor f1060900.xor: Marvell shared XOR driver
[    0.241717] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.241857] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.242621] console [ttyS0] disabled
[    0.262683] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
[    0.983287] console [ttyS0] enabled
[    0.988691] loop: module loaded
[    0.992090] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    1.001176] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    1.010274] scsi host0: ahci-mvebu
[    1.013847] scsi host1: ahci-mvebu
[    1.017348] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[    1.025306] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[    1.033594] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[    1.041369] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[    1.047747] nand: AMD/Spansion S34ML02G2
[    1.051690] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[    1.059379] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[    1.066556] Bad block table found at page 131008, version 0x01
[    1.072752] Bad block table found at page 130944, version 0x01
[    1.078863] 11 ofpart partitions found on MTD device pxa3xx_nand-0
[    1.085074] Creating 11 MTD partitions on "pxa3xx_nand-0":
[    1.090582] 0x000000000000-0x000000200000 : "u-boot"
[    1.095830] 0x000000200000-0x000000220000 : "u_env"
[    1.100951] 0x000000220000-0x000000260000 : "s_env"
[    1.106089] 0x0000007e0000-0x000000820000 : "devinfo"
[    1.111433] 0x000000820000-0x000000a00000 : "sysdiag"
[    1.116797] 0x000000a00000-0x000005a00000 : "kernel1"
[    1.122301] 0x000001000000-0x000005a00000 : "ubi"
[    1.127404] 0x000005a00000-0x00000aa00000 : "kernel2"
[    1.132905] 0x000006000000-0x00000aa00000 : "rootfs2"
[    1.138362] 0x00000aa00000-0x000010000000 : "syscfg"
[    1.143774] 0x000000260000-0x000000820000 : "unused_area"
[    1.149701] libphy: Fixed MDIO Bus: probed
[    1.154064] libphy: orion_mdio_bus: probed
[    1.158297] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    1.166962] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:b9:ea:c0
[    1.175959] mvneta f1034000.ethernet eth1: Using random mac address a2:8d:5e:6d:ee:98
[    1.183881] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.190435] ehci-pci: EHCI PCI platform driver
[    1.194928] ehci-platform: EHCI generic platform driver
[    1.200245] ehci-orion: EHCI orion driver
[    1.204336] orion-ehci f1058000.usb: EHCI Host Controller
[    1.209765] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    1.217412] orion-ehci f1058000.usb: irq 37, io mem 0xf1058000
[    1.251329] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    1.257480] hub 1-0:1.0: USB hub found
[    1.261254] hub 1-0:1.0: 1 port detected
[    1.265551] usbcore: registered new interface driver usb-storage
[    1.271723] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[    1.279341] i2c /dev entries driver
[    1.294252] orion_wdt: Initial timeout 171 sec
[    1.298933] sdhci: Secure Digital Host Controller Interface driver
[    1.305146] sdhci: Copyright(c) Pierre Ossman
[    1.362546] ata1: SATA link down (SStatus 0 SControl 300)
[    1.367991] ata2: SATA link down (SStatus 0 SControl 300)
[    1.371354] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[    1.371428] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.377154] marvell-cesa f1090000.crypto: CESA device successfully registered
[    1.377556] NET: Registered protocol family 10
[    1.391590] NET: Registered protocol family 17
[    1.391604] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.391605] 8021q: 802.1Q VLAN Support v1.8
[    1.391661] Registering SWP/SWPB emulation handler
[    1.392791] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.392803] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    1.392861] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    1.392881] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[    1.393134] hub 2-0:1.0: USB hub found
[    1.393160] hub 2-0:1.0: 1 port detected
[    1.393247] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.393253] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    1.393292] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.393478] hub 3-0:1.0: USB hub found
[    1.393501] hub 3-0:1.0: 1 port detected
[    1.393820] UBI: auto-attach mtd6
[    1.393824] ubi0: attaching mtd6
[    1.397930] random: fast init done
[    1.401551] mmc0: new high speed SDIO card at address 0001
[    1.593092] ubi0: scanning is finished
[    1.601334] ubi0: attached mtd6 (name "ubi", size 74 MiB)
[    1.606756] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.613664] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.620479] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.627475] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0
[    1.633508] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    1.640759] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1419003487
[    1.649932] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 40
[    1.659197] ubi0: background thread "ubi_bgt0d" started, PID 668
[    1.659208] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    1.659643] block ubiblock0_0: created from ubi0:0(rootfs)
[    1.659645] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    1.659829] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mi:10
[    1.659832] mvsw61xx 10.mvsw61xx: Using direct addressing
[    1.671972] armada38x-rtc f10a3800.rtc: setting system clock to 2101-11-05 12:45:50 UTC (4160637950)
[    1.705850] Waiting 1 sec before mounting root device...
[    1.852932] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.859142] scsi host2: usb-storage 1-1:1.0
[    2.722974] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    2.730260] Freeing unused kernel memory: 280K (c05d4000 - c061a000)
[    2.736655] This architecture does not have kernel memory protection.
[    2.855724] init: Console is alive
[    2.859203] init: - watchdog -
[    2.924338] scsi 2:0:0:0: Direct-Access     Samsung  S2 Portable           PQ: 0 ANSI: 2 CCS
[    3.111498] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.151660] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.159777] sd 2:0:0:0: [sda] Write Protect is off
[    3.164597] sd 2:0:0:0: [sda] Mode Sense: 28 00 00 00
[    3.165152] sd 2:0:0:0: [sda] No Caching mode page found
[    3.170490] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    3.179038]  sda: sda1
[    3.183653] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.188738] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.195221] ohci-platform: OHCI generic platform driver
[    3.200902] uhci_hcd: USB Universal Host Controller Interface driver
[    3.207556] ohci-pci: OHCI PCI platform driver
[    3.212156] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.228593] init: - preinit -
[    3.422394] mvneta f1070000.ethernet tmp0: renamed from eth0
[    3.462586] mvneta f1034000.ethernet eth0: renamed from eth1
[    3.512510] mvneta f1070000.ethernet eth1: renamed from tmp0
[    3.833291] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[    3.840562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.846607] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[    3.854578] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.909798] mount_root: loading kmods from internal overlay
[    5.921475] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    5.929503] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    6.328768] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 806
[    6.357145] UBIFS (ubi0:1): recovery needed
[    6.403932] random: crng init done
[    6.431762] UBIFS (ubi0:1): recovery completed
[    6.436249] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    6.444117] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.454076] UBIFS (ubi0:1): FS size: 61329408 bytes (58 MiB, 483 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
[    6.464556] UBIFS (ubi0:1): reserved for root: 2896739 bytes (2828 KiB)
[    6.471198] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DEE50754-EFFE-4990-A7A6-C97266C9BEF0, small LPT model
[    6.483473] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    6.493882] block: extroot: not configured
[    6.531369] UBIFS (ubi0:1): un-mount UBI device 0
[    6.536097] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[    6.544028] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 809
[    6.591527] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    6.599392] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.609356] UBIFS (ubi0:1): FS size: 61329408 bytes (58 MiB, 483 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
[    6.619838] UBIFS (ubi0:1): reserved for root: 2896739 bytes (2828 KiB)
[    6.626483] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DEE50754-EFFE-4990-A7A6-C97266C9BEF0, small LPT model
[    6.641627] mount_root: loading kmods from internal overlay
[    6.652909] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[    6.670201] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[    7.078279] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    7.086484] block: extroot: not configured
[    7.132013] mount_root: switching to ubifs overlay
[    7.176201] ubi1: attaching mtd9
[    7.407547] ubi1: scanning is finished
[    7.415742] ubi1: attached mtd9 (name "syscfg", size 86 MiB)
[    7.421435] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    7.428338] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    7.435155] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    7.442148] ubi1: good PEBs: 680, bad PEBs: 8, corrupted PEBs: 0
[    7.448177] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    7.455430] ubi1: max/mean erase counter: 6/4, WL threshold: 4096, image sequence number: 1148089792
[    7.464603] ubi1: available PEBs: 0, total reserved PEBs: 680, PEBs reserved for bad PEB handling: 32
[    7.473869] ubi1: background thread "ubi_bgt1d" started, PID 824
[    7.485213] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 828
[    7.537764] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg"
[    7.545202] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.555161] UBIFS (ubi1:0): FS size: 80375808 bytes (76 MiB, 633 LEBs), journal size 4063232 bytes (3 MiB, 32 LEBs)
[    7.565642] UBIFS (ubi1:0): reserved for root: 3796347 bytes (3707 KiB)
[    7.572287] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A5EAB2F8-92D3-4D0B-A69A-9F6CA9A608B3, small LPT model
[    7.585463] urandom-seed: Seeding with /etc/urandom.seed
[    7.684142] procd: - early -
[    7.687055] procd: - watchdog -
[    8.315049] procd: - ubus -
[    8.371904] procd: - init -
[    8.546612] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.557859] tun: Universal TUN/TAP device driver, 1.6
[    8.562965] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    8.571391] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    8.580401] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.587876] cryptodev: driver 1.8 loaded.
[    8.592340] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[    8.600387] Backport generated by backports.git backports-20160324-13-g24da7d3c
[    8.615059] <<Marvell 802.11ac Wireless Network Driver version 10.3.2.0-20170110>>
[    8.622702] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    8.628443] ieee80211 phy0: priv->iobase0 = e0f80000
[    8.628454] ieee80211 phy0: priv->iobase1 = e1200000
[    8.628463] ieee80211 phy0: priv->pcmd_buf = ddf08000  priv->pphys_cmd_buf = 1df08000
[    8.636458] ieee80211 phy0: fw download start
[    8.699990] ieee80211 phy0: FwSize = 207660 downloaded Size = 207660 curr_iteration 65522
[   12.431324] ieee80211 phy0: fw download complete
[   12.431783] ieee80211 phy0: pcmd = ddf08000
[   12.449817] ieee80211 phy0: firmware version: 0x7080004
[   12.809338] ieee80211 phy0: firmware region code: 10
[   12.851995] ieee80211 phy0: 2G disabled, 5G enabled
[   12.856895] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[   12.862298] pci 0000:00:02.0: enabling device (0140 -> 0142)
[   12.868032] ieee80211 phy1: priv->iobase0 = e1380000
[   12.868043] ieee80211 phy1: priv->iobase1 = e1600000
[   12.868052] ieee80211 phy1: priv->pcmd_buf = dddf0000  priv->pphys_cmd_buf = 1ddf0000
[   12.874418] ieee80211 phy1: fw download start
[   12.939175] ieee80211 phy1: FwSize = 207660 downloaded Size = 207660 curr_iteration 65527
[   14.327325] ieee80211 phy1: fw download complete
[   14.327812] ieee80211 phy1: pcmd = dddf0000
[   14.345344] ieee80211 phy1: firmware version: 0x7080004
[   14.706323] ieee80211 phy1: firmware region code: 10
[   14.750021] ieee80211 phy1: 2G enabled, 5G disabled
[   14.754934] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[   14.762803] u32 classifier
[   14.765522]     input device check on
[   14.769196]     Actions configured
[   14.773037] Mirror/redirect action on
[   14.778285] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   14.790080] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.799009] mwifiex: rx work enabled, cpus 2
[   14.846998] usbcore: registered new interface driver ums-alauda
[   14.853672] usbcore: registered new interface driver ums-cypress
[   14.860218] usbcore: registered new interface driver ums-datafab
[   14.866723] usbcore: registered new interface driver ums-freecom
[   14.873187] usbcore: registered new interface driver ums-isd200
[   14.879542] usbcore: registered new interface driver ums-jumpshot
[   14.886112] usbcore: registered new interface driver ums-karma
[   14.892282] usbcore: registered new interface driver ums-sddr09
[   14.898499] usbcore: registered new interface driver ums-sddr55
[   14.904752] usbcore: registered new interface driver ums-usbat
[   14.917781] xt_time: kernel timezone is -0000
[   14.925132] PPP generic driver version 2.4.2
[   14.929843] NET: Registered protocol family 24
[   14.935112] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.469997] mwifiex_sdio mmc0:0001:1: info: FW download over, size 391772 bytes
[   15.831665] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[   15.864262] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x242 error, result=0x2
[   15.871261] mwifiex_sdio mmc0:0001:1: mwifiex_process_cmdresp: cmd 0x242 failed during       initialization
[   15.890625] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.7.p5)
[   15.898674] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.68.7.p5)
[   16.052347] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[   16.059309] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.065375] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   16.073372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.081683] br-lan: port 1(eth0.1) entered blocking state
[   16.087106] br-lan: port 1(eth0.1) entered disabled state
[   16.092675] device eth0.1 entered promiscuous mode
[   16.097485] device eth0 entered promiscuous mode
[   16.103227] br-lan: port 1(eth0.1) entered blocking state
[   16.108650] br-lan: port 1(eth0.1) entered forwarding state
[   16.122758] mvneta f1070000.ethernet eth1: configuring for fixed link mode
[   16.130044] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   16.136169] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   16.144170] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   16.342477] pppoe-wan: renamed from ppp0
[   16.900336] ieee80211 phy1: change: 0xffffffff
[   17.006509] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   17.137396] ieee80211 phy0: change: 0xffffffff
[   17.271596] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.277594] br-lan: port 2(wlan1) entered blocking state
[   17.282955] br-lan: port 2(wlan1) entered disabled state
[   17.288408] device wlan1 entered promiscuous mode
[   17.293166] br-lan: port 2(wlan1) entered blocking state
[   17.298502] br-lan: port 2(wlan1) entered forwarding state
[   17.304255] br-lan: port 2(wlan1) entered disabled state
[   17.309734] br-lan: port 3(wlan0) entered blocking state
[   17.315091] br-lan: port 3(wlan0) entered disabled state
[   17.320543] device wlan0 entered promiscuous mode
[   17.327109] ieee80211 phy0: change: 0x100
[   17.344423] ieee80211 phy0: change: 0x40
[   17.380440] ieee80211 phy1: change: 0x100
[   17.392530] ieee80211 phy1: change: 0x42
[   17.593821] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   17.600257] br-lan: port 2(wlan1) entered blocking state
[   17.605603] br-lan: port 2(wlan1) entered forwarding state
[   17.611269] ieee80211 phy0: change: 0x40
[   17.671185] ieee80211 phy1: change: 0x20
[   17.861365] ieee80211 phy0: change: 0x40
[   17.993370] ieee80211 phy0: change: 0x100
[   18.060535] ieee80211 phy0: change: 0x100
[   18.073629] ieee80211 phy0: change: 0x42
[   18.341340] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   18.347812] br-lan: port 3(wlan0) entered blocking state
[   18.353170] br-lan: port 3(wlan0) entered forwarding state
 root@LEDE:~# lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04e8:1f05 Samsung Electronics Co., Ltd S2 Portable [JMicron] (500GB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

After i remove the cable and hotplug i get this additional lines in DMESG:

 #
[  527.103849] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
[  527.134880] usb-storage 3-1:1.0: USB Mass Storage device detected
[  527.141155] scsi host3: usb-storage 3-1:1.0
[  528.154087] scsi 3:0:0:0: Direct-Access     Seagate  Expansion        1805 PQ: 0 ANSI: 6
[  529.455313] sd 3:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[  529.463210] sd 3:0:0:0: [sdb] Write Protect is off
[  529.468032] sd 3:0:0:0: [sdb] Mode Sense: 33 00 00 08
[  529.473381] sd 3:0:0:0: [sdb] No Caching mode page found
[  529.478724] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  529.499962]  sdb: sdb1 sdb2
[  529.503903] sd 3:0:0:0: [sdb] Attached SCSI disk
[  612.132851] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:
root@LEDE:~# lsusb
Bus 003 Device 002: ID 0bc2:231b Seagate RSS LLC
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04e8:1f05 Samsung Electronics Co., Ltd S2 Portable [JMicron] (500GB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub 


Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing